This fits your .
This sleek and highly-functional shelf helps to maximize the space utilization and organize various devices. It not only stores a variety of stuff but also enhances your room decor as well.
Strong Bearing Capacity:
Frame material is thickened board which ensures stability and durability, can hold up to 60 lbs.
Built to Last:
Waterproof & Scratch-resistant, built to last. Safety Design:
Safety Round Corner Design, protect children and the elder from collision and avoid injury.
Cable Hole Design for better cable management, easy for cables to go through, no more mess from now! Cables are neatly concealed to give the console a professional, minimalist look!
1. Tighten 8 black screws on the two long boards. (As shown in Figure 2 of the manual)
2. The side iron of a long panel is installed 4~5cm away from the black bolt, and the back is on the same horizontal line as the panel.
3. The side iron of the other long panel is installed 2~3cm away from the black bolt, and the back is on the same horizontal line as the panel.
4.Tighten the screw of the edge iron,the put the small panel in the beteeen the black bolts,tighten the nut following the clockwise.(As shown in Figure 5)
5.Tighten the total 8 nuts ,the fitting of fitting finished.(As shown in Figure 6)
6.Place the shelf in the position where to be installed,the put the gradienter in the center of the shelf,adjusting the level.
7.Mark the position of the shelf.(As shown in Figure 10)
8.Punching holes of 4~5cm deep in the position that marked with the 8mm drill.(As shown in Figure 11)
9.knocked into the plastic bulge,at the same level as the wall.(As shown in Figure 12)
10.Place the edge iron at the position of the hole,put the long bolt twist,into the plastic bulge,tighten it follow the clockwise.(As shown in Figure 13)
11.Tigten all the screws,installatiomn finished.
BiJun Floating TV Shelf Entertainment Center Wall Mounted Media Console Router DVD Shelf for One PS4 Cable Box DVD Players Game Console Streaming Media Equipment Black 35.4 - BMDWV68SO